Define the electrical window
Provide nominal voltage, maximum charging voltage, continuous load and measured peak current.
ENGINEERING BRIEF
Good requirements make better decisions.
Jetray’s corporate website describes cell selection, BMS design, prototyping and custom pack services. Use this brief to discuss the scope and feasibility of your own project.
From requirements to review
Make the important interfaces explicit.
Explore lithium-ion battery packs by voltage, energy and integration needs. Start with the load profile. Build the specification around the real application.
Photograph from the Jetray corporate factory page.
Make the integration measurable
Document the enclosure drawing, cable routing, connector pinout and communication requirements.
Agree the acceptance test
Use a signed specification covering capacity test conditions, protection limits and sample approval.
A practical project brief
What to share with the engineering team.
Electrical
Nominal system voltage, allowable input window, continuous current, peak current and peak duration.
Mechanical
Available envelope, fixing points, weight constraints, cable routing, connector and polarity.
Charging & communication
Charger model, charging opportunities, temperature sensing and required BMS or communication signals.
Project & documentation
Intended use, target markets, sample quantities, forecast volume, required test evidence and revision controls.
Project review stages
Keep the decisions and the documents together.
Use these review gates to organize a project discussion with the supplier. The agreed scope and deliverables are confirmed for the individual project.
| Stage | Information to align | Decision to record |
|---|---|---|
| Requirements brief | Operating voltage window, continuous current and startup peaks; Ambient temperature, handling and available enclosure space | The equipment needs, mandatory limits and open questions. |
| Configuration review | Record the battery configuration, charge and discharge limits and the electrical interface to the host equipment. | The proposed model or design scope, interface drawing and document revision. |
| Sample evaluation | Representative equipment, operating cycle and acceptance procedure. | Results, deviations and changes needed before the next stage. |
| Order preparation | The approved configuration, quantity, packaging and required shipment documents. | The purchase specification, acceptance method and agreed commercial terms. |
A useful conversation starts with a specification
Tell us what your equipment needs.
Share the load, dimensions and intended use. Ask for a current model specification and a project review.