JETRAY / Battery engineering & sourcingShenzhen, Chinasale1@jetray.cn ↗
JETRAYLithium-ion Battery PacksBlog
HomeApplications
APPLICATION PLANNING

Build around the operating conditions.

Start with the equipment, its environment and its work cycle. Use the following requirements to prepare a focused engineering discussion.

Application / 01

Portable industrial equipment

Balance usable energy with enclosure space, connector access and service requirements.

What to define

  • Provide nominal voltage, maximum charging voltage, continuous load and measured peak current.
  • The acceptable voltage window and behavior during start-up or a low-battery event.
  • The installation drawing, charging interface and expected environment.
  • Acceptance criteria for the complete equipment, including its battery interface.
Discuss this application
Application / 02

Monitoring and communications

Define standby consumption, peak transmission demand and required backup duration.

What to define

  • Document the enclosure drawing, cable routing, connector pinout and communication requirements.
  • The acceptable voltage window and behavior during start-up or a low-battery event.
  • The installation drawing, charging interface and expected environment.
  • Acceptance criteria for the complete equipment, including its battery interface.
Discuss this application
Application / 03

Mobile equipment

Share acceleration peaks, vibration conditions and the available charger before selecting a pack.

What to define

  • Use a signed specification covering capacity test conditions, protection limits and sample approval.
  • The acceptable voltage window and behavior during start-up or a low-battery event.
  • The installation drawing, charging interface and expected environment.
  • Acceptance criteria for the complete equipment, including its battery interface.
Discuss this application
Catalogue references support a project discussion. They do not establish approval for a medical device, vehicle, robot or complete energy installation.
APPLICATION CASE FILES / CUSTOM PACK SYSTEMS

See the decisions behind an application.

Explore practical planning briefs for lithium-ion battery packs: the operating challenge, integration approach and sample-review questions.

These are application planning examples, not documented customer deployments. Factory photographs are from the Jetray corporate website and do not identify a customer project.

Application decision map

Connect the use case to the battery requirements.

A useful application review starts with what the equipment does, how it is powered and how it will be evaluated.

Application focusRequirement to definePractical review step
Portable industrial equipmentBalance usable energy with enclosure space, connector access and service requirements.Provide nominal voltage, maximum charging voltage, continuous load and measured peak current.
Monitoring and communicationsDefine standby consumption, peak transmission demand and required backup duration.Document the enclosure drawing, cable routing, connector pinout and communication requirements.
Mobile equipmentShare acceleration peaks, vibration conditions and the available charger before selecting a pack.Use a signed specification covering capacity test conditions, protection limits and sample approval.

Bring a representative duty cycle.

Operating voltage window, continuous current and startup peaks. Record normal operation, idle periods and the conditions that create the highest demand.

Agree the equipment test.

Define the sample configuration, setup, pass criteria and responsible reviewers before comparing results.

A useful conversation starts with a specification

Tell us what your equipment needs.

Share the load, dimensions and intended use. Ask for a current model specification and a project review.

Discuss your project

Product comparison